Konmax Slow Juicer Description:
A centrifugal juicer is usually composed of three parts: a machine
shell, a juice extraction component, and an electric component. The
shell is usually made of transparent polycarbonate plastic, which
has the characteristics of high strength, impact resistance, and
resistance to breakage.
The shell, motor shell, and base of the centrifugal component are
usually made of engineering plastic ABS, which is non-toxic,
odorless, tough, hard, and rigid. The juice extraction part of the
juice extractor is blade-shaped and is installed in the center of
the juice extraction cup.
The blade is made of high chromium stainless steel. The lower end
of the knife shaft is equipped with a helical gear shaft extension,
which is connected to the output shaft of the motor. Electric
components are mainly used to provide power for the juicer. The
commonly used series motor is a series motor, which has the
characteristics of high power, high efficiency, and the speed can
change with the load torque. The maximum can be about 190300r/min.
Konmax Slow Juicer Application:
Hotel, drink shops , restaurant
Konmax Slow Juicer Specification:
| |
| Category | Juicer |
Item | Centrifugal Juicer |
Material | Stainless Steel, BPA-Free Food Grade Plastic |
Color | Silver |
Size | 10.2"x 7.4"x 11.4" |
Net Weight | 2.7kg |
| Power | 500W |
Voltage | 110-130V |
Plug | VDE |
| Packaging Details | 1) 1 x Masticating Juicer 2) 1 x pusher 3) 1 x juice container 4) 1
x pulp container 5) 1 x peeler 6) 1 x Brush 7) 1 x User Manual
8) 1 x Recipe 9) 1 x warranty card |
Box Size | 25x15.5x30cm |
Gross Weight | 2.9kg |
| MOQ | 1000pcs |
Production Lead Time | 60days |
| CB/CE/EMC/LFGB/KC |
Konmax Slow Juicer Ingredients that need attention
1. Please do not put in sesame, peas, pepper and other ingredients
that cannot work properly.
2. Please do not throw in loach, eel, shrimp and squid rolls, etc.
3. Please do not put in fruits (grapes, mulberries, etc.) pickled
with wine, honey, sugar, etc.
Konmax Slow Juicer Detailed Photo :
1 gear (low gear)
Suitable for processing soft fruits and vegetables such as
watermelon and tomatoes
2nd gear (high gear)
Suitable for harder fruits and vegetables such as apples and
carrots.
12 rows of crushed to the end to separate more thoroughly, 304
stainless steel microporous grinding mesh
Wide feeding mouth :Without cutting the whole squeezing, the taste
is better without oxidation.
Non-slip base design , firmly hold the besktop , perfect prevent
the juice from flowing outside
How to use the slow juicer ?
1. Align the middle frame with the host vertically, put it down,
and assemble it in place.
2. Align the bottom of the juice extraction net with the motor
wheel and press it down. Use both hands to make sure that the press
is in place. Rotate a few times to see if there is any scratching
in the rack. (When lifted, it is taken apart)
3. Install the top cover and fasten the safety buckle. (When
buckling the safety buckle, please buckle the upper part of the
buckle first, and then press it down to buckle in place. The
opposite is true when disassembling, please open the bottom of the
buckle first to open the safety buckle)
4. Try the machine to see if it works normally. If the noise or
vibration is too large, you can install it again. Pressing the
juicer net in another position will have a good effect
5. Peel and core the vegetables and fruits first, wash and set
aside. If the size is larger than the filling opening, please cut
it into small pieces.
6. Put the juice cup at the juice outlet and the big slag
collecting bucket at the slag outlet.
7. Turn on the machine, put the fruits and vegetables into the
juicer, press down with the push rod, you can squeeze fresh and
delicious juice.
8. After squeezing out the juice, some juicers have an external
juicer for the convenience of customers, and they need to pour the
juice into their own cups.
9. Pour out the pomace and prepare for cleaning.
